[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.0-rc4+ (kevin@kevinolos) (gcc version 4.7.2 (Debian 4.7.2-5) ) #6 SMP Sun Mar 31 10:33:16 MDT 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.9.0-rc4+ root=UUID=7a92180f-519c-49f5-a5c1-71e7c48d3a06 ro single [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ad5effff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad5f0000-0x00000000bae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 2342CTO/2342CTO, BIOS G1ET93WW (2.53 ) 03/08/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13F000000 mask FFF000000 uncachable [ 0.000000] 7 base 13E800000 mask FFF800000 uncachable [ 0.000000] 8 base 13E600000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xad5f0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02274000, 0x02274fff] PGTABLE [ 0.000000] BRK [0x02275000, 0x02275fff] PGTABLE [ 0.000000] BRK [0x02276000, 0x02276fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13e400000-0x13e5fffff] [ 0.000000] [mem 0x13e400000-0x13e5fffff] page 2M [ 0.000000] BRK [0x02277000, 0x02277fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13e3fffff] [ 0.000000] [mem 0x13c000000-0x13e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x02278000, 0x02278fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xad5effff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xad3fffff] page 2M [ 0.000000] [mem 0xad400000-0xad5effff] page 4k [ 0.000000] RAMDISK: [mem 0x36828000-0x3740bfff] [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000baffe170 000C4 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: FACP 00000000bafe7000 0010C (v05 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000bafe9000 0FE86 (v01 LENOVO TP-G1 00002530 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf5a000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-G1 00002530 PTL 00000001) [ 0.000000] ACPI: TCPA 00000000baffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000baffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baff9000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000bafe5000 00038 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafe4000 00098 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafe3000 0003C (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000bafe2000 00052 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: FPDT 00000000bafe1000 00064 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000bafe8000 000A5 (v32 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe0000 0003E (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafdf000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 00000000bafde000 00055 (v03 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafdd000 00C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafdc000 00A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000bafdb000 000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafda000 002A6 (v01 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: DBG2 00000000bafd9000 000E9 (v00 LENOVO TP-G1 00002530 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13e5fffff] [ 0.000000] NODE_DATA [mem 0x13e5f8000-0x13e5fcfff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013a000000-ffff88013d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xad5effff] [ 0.000000] node 0: [mem 0x100000000-0x13e5fffff] [ 0.000000] On node 0 totalpages: 965003 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9646 pages used for memmap [ 0.000000] DMA32 zone: 705519 pages, LIFO batch:31 [ 0.000000] Normal zone: 3493 pages used for memmap [ 0.000000] Normal zone: 255488 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000 [ 0.000000] PM: Registered nosave memory: 00000000ad5f0000 - 00000000bae9f000 [ 0.000000] PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bafff000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013e200000 s83200 r8192 d23296 u262144 [ 0.000000] pcpu-alloc: s83200 r8192 d23296 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 951787 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.9.0-rc4+ root=UUID=7a92180f-519c-49f5-a5c1-71e7c48d3a06 ro single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3705732k/5216256k available (3901k kernel code, 1356244k absent, 154280k reserved, 4960k data, 872k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 15728640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2593.977 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.95 BogoMIPS (lpj=10375908) [ 0.000123] pid_max: default: 32768 minimum: 301 [ 0.000255] Security Framework initialized [ 0.000316] AppArmor: AppArmor disabled by boot time parameter [ 0.000664] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001735] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002229] Mount-cache hash table entries: 256 [ 0.002886] Initializing cgroup subsys cpuacct [ 0.002952] Initializing cgroup subsys memory [ 0.003042] Initializing cgroup subsys devices [ 0.003100] Initializing cgroup subsys freezer [ 0.003169] Initializing cgroup subsys net_cls [ 0.003229] Initializing cgroup subsys blkio [ 0.004508] Initializing cgroup subsys perf_event [ 0.004618] CPU: Physical Processor ID: 0 [ 0.004675] CPU: Processor Core ID: 0 [ 0.004734] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.004734] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005177] mce: CPU supports 7 MCE banks [ 0.005245] CPU0: Thermal monitoring enabled (TM1) [ 0.005315] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.005315] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.005315] tlb_flushall_shift: 1 [ 0.005532] Freeing SMP alternatives: 8k freed [ 0.005597] ACPI: Core revision 20130117 [ 0.019965] ACPI: All ACPI Tables successfully acquired [ 0.021248] dmar: Host address width 36 [ 0.021308] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.021375] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.021450] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.021516] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.021591] dmar: RMRR base: 0x000000ba470000 end: 0x000000ba486fff [ 0.021654] dmar: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.021790] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.021851] HPET id 0 under DRHD base 0xfed91000 [ 0.022100] Enabled IRQ remapping in x2apic mode [ 0.022162] Enabling x2apic [ 0.022218] Enabled x2apic [ 0.022280] Switched APIC routing to cluster x2apic. [ 0.022871] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062641] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09) [ 0.062852] TSC deadline timer enabled [ 0.062869] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.063123] ... version: 3 [ 0.063182] ... bit width: 48 [ 0.063240] ... generic registers: 4 [ 0.063299] ... value mask: 0000ffffffffffff [ 0.063360] ... max period: 000000007fffffff [ 0.063421] ... fixed-purpose events: 3 [ 0.063480] ... event mask: 000000070000000f [ 0.064481] SMP alternatives: lockdep: fixing up alternatives [ 0.078282] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064560] smpboot: Booting Node 0, Processors #1 [ 0.078700] SMP alternatives: lockdep: fixing up alternatives [ 0.078815] #2 [ 0.092539] SMP alternatives: lockdep: fixing up alternatives [ 0.092656] #3 [ 0.106082] Brought up 4 CPUs [ 0.106194] smpboot: Total of 4 processors activated (20751.81 BogoMIPS) [ 0.109433] devtmpfs: initialized [ 0.113110] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes) [ 0.113764] regulator-dummy: no parameters [ 0.114070] NET: Registered protocol family 16 [ 0.114358] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.114442] ACPI: bus type PCI registered [ 0.114754] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.114832] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.119141] PCI: Using configuration type 1 for base access [ 0.119491] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.119553] mtrr: probably your BIOS does not setup all CPUs. [ 0.119615] mtrr: corrected configuration. [ 0.120741] bio: create slab at 0 [ 0.120970] ACPI: Added _OSI(Module Device) [ 0.121031] ACPI: Added _OSI(Processor Device) [ 0.121091] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.121152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.127081] ACPI: EC: EC description table is found, configuring boot EC [ 0.139280] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.144978] ACPI: SSDT 00000000bae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.146619] ACPI: Dynamic OEM Table Load: [ 0.146764] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.147273] ACPI: SSDT 00000000bae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.148977] ACPI: Dynamic OEM Table Load: [ 0.149121] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.149414] ACPI: SSDT 00000000bae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.151057] ACPI: Dynamic OEM Table Load: [ 0.151201] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.152374] ACPI: Interpreter enabled [ 0.152439] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.152604] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.152793] ACPI: (supports S0 S3 S4 S5) [ 0.152852] ACPI: Using IOAPIC for interrupt routing [ 0.152946] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.161648] ACPI: Power Resource [PUBS] (on) [ 0.170338] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.170995] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11) [ 0.171651] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11) [ 0.172305] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.172958] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.173610] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11) [ 0.174273] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.174928] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.175524] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.175873] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.176165] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.176439] PCI host bridge to bus 0000:00 [ 0.176502] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.176563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.176626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.176689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.176754] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff] [ 0.176818] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.176916] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.177136] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.177190] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.177322] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.177339] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.177349] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.177356] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f] [ 0.177511] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.177551] pci 0000:00:14.0: reg 10: [mem 0xf3920000-0xf392ffff 64bit] [ 0.177689] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.177777] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.177953] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.177993] pci 0000:00:16.0: reg 10: [mem 0xf3935000-0xf393500f 64bit] [ 0.178131] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.178306] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.178338] pci 0000:00:19.0: reg 10: [mem 0xf3900000-0xf391ffff] [ 0.178350] pci 0000:00:19.0: reg 14: [mem 0xf393b000-0xf393bfff] [ 0.178362] pci 0000:00:19.0: reg 18: [io 0x6080-0x609f] [ 0.178481] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.178531] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.178668] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.178704] pci 0000:00:1a.0: reg 10: [mem 0xf393a000-0xf393a3ff] [ 0.178854] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.178936] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.179076] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.179106] pci 0000:00:1b.0: reg 10: [mem 0xf3930000-0xf3933fff 64bit] [ 0.179246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.179345] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.179476] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.179623] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.179746] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.179892] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.180022] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.180166] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.180232] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.180380] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.180413] pci 0000:00:1d.0: reg 10: [mem 0xf3939000-0xf39393ff] [ 0.180573] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.180652] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.180782] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.181041] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.181081] pci 0000:00:1f.2: reg 10: [io 0x60a8-0x60af] [ 0.181096] pci 0000:00:1f.2: reg 14: [io 0x60b4-0x60b7] [ 0.181113] pci 0000:00:1f.2: reg 18: [io 0x60a0-0x60a7] [ 0.181129] pci 0000:00:1f.2: reg 1c: [io 0x60b0-0x60b3] [ 0.181145] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f] [ 0.181161] pci 0000:00:1f.2: reg 24: [mem 0xf3938000-0xf39387ff] [ 0.181258] pci 0000:00:1f.2: PME# supported from D3hot [ 0.181383] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.181412] pci 0000:00:1f.3: reg 10: [mem 0xf3934000-0xf39340ff 64bit] [ 0.181457] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.181680] pci 0000:01:00.0: [10de:0def] type 00 class 0x030000 [ 0.181694] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.181708] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.181723] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.181732] pci 0000:01:00.0: reg 24: [io 0x5000-0x507f] [ 0.181742] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.190255] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.190318] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.190322] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.190326] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.190550] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001 [ 0.190571] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.190857] pci 0000:02:00.0: reg 10: [mem 0xf3100000-0xf31000ff] [ 0.191069] pci 0000:02:00.0: supports D1 D2 [ 0.191070] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202452] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.202518] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.202524] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff] [ 0.202534] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.202707] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.202764] pci 0000:03:00.0: reg 10: [mem 0xf3000000-0xf3001fff 64bit] [ 0.203043] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.214257] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.214341] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff] [ 0.214470] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.214536] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.214542] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff] [ 0.214552] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.214583] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.217440] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.217608] acpi root: \_SB_.PCI0 notify handler is installed [ 0.217733] Found 1 acpi root devices [ 0.217935] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.219298] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.219661] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.219745] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.219820] vgaarb: loaded [ 0.219877] vgaarb: bridge control possible 0000:01:00.0 [ 0.219938] vgaarb: no bridge control possible 0000:00:02.0 [ 0.220043] pps_core: LinuxPPS API ver. 1 registered [ 0.220103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.220185] PTP clock support registered [ 0.220266] PCI: Using ACPI for IRQ routing [ 0.222178] PCI: pci_cache_line_size set to 64 bytes [ 0.222589] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.222591] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.222593] e820: reserve RAM buffer [mem 0xad5f0000-0xafffffff] [ 0.222595] e820: reserve RAM buffer [mem 0x13e600000-0x13fffffff] [ 0.222982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.223427] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.225506] Switching to clocksource hpet [ 0.231072] pnp: PnP ACPI init [ 0.231159] ACPI: bus type PNP registered [ 0.231833] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.231899] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.231965] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.232030] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.232095] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.232160] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.232224] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.232287] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.232352] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.232416] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.232481] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.232547] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.232611] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.232676] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.232741] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved [ 0.232807] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.232871] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.232957] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.233095] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.233223] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.233287] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.233351] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.233414] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.233478] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.233541] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.233619] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233683] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.233748] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.233813] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.233880] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.233947] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234049] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.234063] pnp 00:03: [dma 4] [ 0.234101] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.234150] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.234213] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.234269] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.234326] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.234385] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.234469] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.234968] pnp: PnP ACPI: found 10 devices [ 0.235028] ACPI: bus type PNP unregistered [ 0.244447] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.244582] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.244657] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.244719] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.244784] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.244848] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.244926] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.244988] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.245057] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff] [ 0.245124] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.245207] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.245274] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff] [ 0.245349] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.245412] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.245480] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff] [ 0.245547] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.245860] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.245862] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.245864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.245866] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff] [ 0.245868] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.245870] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.245872] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.245874] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.245876] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.245878] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf38fffff] [ 0.245880] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.245882] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff] [ 0.245883] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.245885] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff] [ 0.245887] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.245992] NET: Registered protocol family 2 [ 0.246560] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.246872] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) [ 0.248789] TCP: Hash tables configured (established 32768 bind 32768) [ 0.248905] TCP: reno registered [ 0.248989] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 0.249309] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 0.249832] NET: Registered protocol family 1 [ 0.249911] pci 0000:00:02.0: Boot video device [ 0.250474] PCI: CLS 64 bytes, default 64 [ 0.250635] Unpacking initramfs... [ 0.459324] Freeing initrd memory: 12176k freed [ 0.461024] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.461090] software IO TLB [mem 0xa95f0000-0xad5f0000] (64MB) mapped at [ffff8800a95f0000-ffff8800ad5effff] [ 0.461951] audit: initializing netlink socket (disabled) [ 0.462050] type=2000 audit(1364743416.460:1): initialized [ 0.490838] bounce pool size: 64 pages [ 0.490902] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.491585] VFS: Disk quotas dquot_6.5.2 [ 0.491680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.492033] msgmni has been set to 7261 [ 0.492538] alg: No test for stdrng (krng) [ 0.492647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.492806] io scheduler noop registered [ 0.492866] io scheduler deadline registered [ 0.492954] io scheduler cfq registered (default) [ 0.494612] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.494998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.495148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.495211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.495650] acpiphp: Slot [1] registered [ 0.496123] intel_idle: MWAIT substates: 0x21120 [ 0.496124] intel_idle: v0.4 model 0x3A [ 0.496126] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.496232] GHES: HEST is not enabled! [ 0.496360] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.497346] Linux agpgart interface v0.103 [ 0.497531] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.497608] Hangcheck: Using getrawmonotonic(). [ 0.497717] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k [ 0.497792] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.498000] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.498083] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.498222] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 0.692792] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.692856] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:01:67:81 [ 0.692931] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.693028] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 0.693186] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.694846] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.694937] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.695280] mousedev: PS/2 mouse device common for all mice [ 0.695568] rtc_cmos 00:06: RTC can wake from S4 [ 0.695950] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.696071] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.696458] cpuidle: using governor ladder [ 0.696955] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.697437] cpuidle: using governor menu [ 0.697532] drop_monitor: Initializing network drop monitor service [ 0.697724] TCP: cubic registered [ 0.697900] NET: Registered protocol family 10 [ 0.698502] mip6: Mobile IPv6 [ 0.698571] NET: Registered protocol family 17 [ 0.699227] PM: Hibernation image not present or could not be loaded. [ 0.699249] registered taskstats version 1 [ 0.700436] console [netcon0] enabled [ 0.700495] netconsole: network logging started [ 0.702112] Freeing unused kernel memory: 872k freed [ 0.702276] Write protecting the kernel read-only data: 8192k [ 0.703075] Freeing unused kernel memory: 184k freed [ 0.707043] Freeing unused kernel memory: 2000k freed [ 0.774117] udevd[69]: starting version 175 [ 0.825634] SCSI subsystem initialized [ 0.830450] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.830521] ACPI: Thermal Zone [THM0] (52 C) [ 0.845532] ACPI: bus type ATA registered [ 0.847031] libata version 3.00 loaded. [ 0.855303] ahci 0000:00:1f.2: version 3.0 [ 0.855541] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.856535] ahci: SSS flag set, parallel bus scan disabled [ 0.868224] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17 [ 0.868570] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17 [ 0.868694] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17 [ 0.868812] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17 [ 0.869082] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.870076] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.870162] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst [ 0.870251] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.881708] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.887644] scsi0 : ahci [ 0.888308] scsi1 : ahci [ 0.889492] scsi2 : ahci [ 0.889894] scsi3 : ahci [ 0.890323] scsi4 : ahci [ 0.891109] scsi5 : ahci [ 0.891462] ata1: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938100 irq 44 [ 0.891543] ata2: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938180 irq 44 [ 0.891629] ata3: DUMMY [ 0.891689] ata4: DUMMY [ 0.891752] ata5: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938300 irq 44 [ 0.891836] ata6: DUMMY [ 1.210324] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.221838] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.221857] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.221933] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.231749] ata1.00: ATA-9: INTEL SSDSC2BW180A3L, LF1i, max UDMA/133 [ 1.231832] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.241755] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.241776] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.241853] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.251778] ata1.00: configured for UDMA/133 [ 1.252573] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW18 LF1i PQ: 0 ANSI: 5 [ 1.458510] tsc: Refined TSC clocksource calibration: 2594.107 MHz [ 1.458590] Switching to clocksource tsc [ 1.570549] ata2: SATA link down (SStatus 0 SControl 300) [ 1.898765] ata5: SATA link down (SStatus 0 SControl 300) [ 1.908185] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB) [ 1.908404] sd 0:0:0:0: [sda] Write Protect is off [ 1.908468] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.908506] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.911473] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.913009] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.972505] device-mapper: uevent: version 1.0.3 [ 1.972803] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 6.403867] bio: create slab at 1 [ 6.563803] bio: create slab at 1 [ 6.643009] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.855192] udevd[463]: starting version 175 [ 11.430072] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard